Anything kept in a higher location will never be simple to access. The biggest problem we have with plants that are kept higher than typical is watering. It is impossible to remove every plant, water it in its soil, and then replace it.
It will be too chaotic to repeat this action over and over. This kind of question on how one can water plant on high shelves is evident. I’ll demonstrate a variety of options for how to water plants on high shelves in this article.
Watering of Plants On High Shelves in Different Ways
It’s not new to keep plants on high shelves. People have kept plants on high shelves for a long enough period of time to develop various techniques for watering them. Even automatic irrigation techniques exist. Let’s start.
Climb Up Using a Ladder
If someone is curious in how to water a wall-mounted plant, we’ll start with the most tedious procedure imaginable. Getting a stepping stool or ladder to reach those extremely high plants is probably the most effective way to water your indoor plants, even though doing it the hard way may not be for everyone. However, it is really inconvenient and takes a long time.
The best way to make sure your plants get the appropriate amount of water without drowning them and letting them go bad is to water them over the sink. To provide them enough water to feed on, this means physically removing them from their inconvenient location.
The ladder-sink method will probably become tedious after three cycles if your plants are kept in built-in-the-wall pots or if you have many to count. However, this method will work for one or two plants that are hard to get to.
DIY Water Bottle for Hanging Plants
The answer to your question, how can one water his or her houseplant that are on high shelves? is probably this technique. You can build a DIY version of the most affordable hanging plant water bottle imaginable for less than $10. You only require the following:
- Spray bottle
- A smidgeon of aquarium tubing
- Hot air gun
If everything is available, let’s start the making – Start by taking the nozzle out of the plastic spray bottle. For a tight fit, insert the nozzle cap into the 3/4 heat shrink tube and shrink it with the hot air gun.
To further firmly join the nozzle cap into the tube, place the 12′ shrink tubing over the heat-treated component. the region with heated air after that. Slip the previously shrunk tube section over the 1/4 shrink tubing, and then continue the heating process until it is snug.
The aquarium tube should then be fastened to the base of a long branch, bamboo pole, or metal rod.
Even with a spray, bottom watering can be used to access difficult-to-reach shelves. Placing plastic trays underneath your plants and simply watering the trays rather than the soil or plants is another way to use bottom-watering.
Reaching difficult-to-reach shelves can be accomplished by bottom watering, even with a spray. Placing plastic trays underneath your plants and soaking simply the trays rather than the soil or plant will also work as a bottom-watering technique.
Using Plastic or Glazed Pots
How often your plants need to be watered may depend on the sort of container they are kept in. To help your plants retain moisture, you can place plants in plastic containers rather than terracotta pots.
Your plants usually become dry in terracotta pots. Earthenware in the form of terracotta dries quickly, making it perfect for plants like succulents and cacti that prefer soil with good drainage. A glazed or plastic container, however, will enable you to skip watering for a few extra days for the majority of species.
Keep Plants Soil Free
Without soil, many plants may flourish. Other soil-free methods, including hydroponics or water propagation, can aid in the growth of plants in inaccessible locations. These techniques don’t need frequent irrigation and require little maintenance.
Although you will need to change or add water frequently, this is a great solution for hard-to-reach areas.
Using a Garden Sprayer
A garden sprayer is a piece of equipment that is incredibly helpful for applying pesticides or fertilizers to crops grown outdoors or in greenhouses. However, it is helpful for indoor plants. Instead of using a standard watering can that may need to be filled more than once, we discover in the store that a sprayer is excellent for controlling watering for multiple plants.
With the sprayer’s larger nozzle, you can reach higher shelves and extend your reach. Make sure you buy a sprayer that is made particularly for indoor plants and not one that has already applied pesticides from the outside.
You wouldn’t want to accidentally murder your plant-like friends. Garden sprayers are widely available online and in the outdoor and garden sections of large hardware stores.
Automatic Watering System
You may get an automatic watering system based on drip irrigation techniques in several markets. They are not too pricey. They probably don’t even need double A batteries to work.
The fact that these kinds of systems can save at least 60% of water is the finest aspect. Plants can die from overwatering or under watering, but not when an automatic watering system is present.
I think I covered all the ground you needed to know about watering plants on high shelves.